mark williamson design 

45ft Sportsfisherman

Principal Data

Length Overall	15.0 metres
Length WL	13.7 metres
Beam	4.85 metres
Draft	1.35  metres
Construction	Aluminium
Main Engines	1 x MTU Series 60  615kW @ 2300rpm
Gearbox	1 x ZF 550A (ratio 2.96:1)
Propulsion	1 x 30"  fixed pitch propeller
Auxiliary	15kVa
Maximum Speed	26 knots
Cruising Speed	12 knots
Fuel Capacity
Range
Freshwater	500 litres
Berths	4-6

Profile, Plan and End Elevation

General Arrangement

Vessel Description

VESSEL TYPE: Semi Displacement, hard chined. Hull and deckhouse fully developable panels.

SURVEY AND CLASSIFICATION:

Shall comply with the requirements of Queensland Survey USL 3C

STRUCTURE:

Hull, Main Deck:  Aluminium

Sheet and Plate - Grade 5083-H321, H116, 5086-H32

Extrusions - Grade 6061-T6, 6082-T5

Filler Wire - Grade 5356

OUTFIT AND FINISHING: The vessel shall be laid out as per the general arrangement drawings and all fittings and equipment required for the operation of the vessel shall be supplied.

Fwd Accommodation

2 x Double berths. Laminated veneer base.  Hanging space.  Stowage.  Hull sides – timber veneer with battens.  Head lining – padded velour with recessed lights.  Teak and holly sole.  

Fully moulded GRP shower/toilet compartment and accessories.

Main Saloon

Wrap around louge with dining table (onvertable to dble berth). Open plan lounge with moveable sofa bases. Laminated veneer base.  Solid timber moulds and frames.  Veneered panels.  Textured head lining.  Recessed lights.  Teak and holly sole.

Galley: Modern layout incorporating Coran bench tops with solid timber doors.  Stainless double bowl sink.  Lami panel splash back.  Shelves.  Stowage.  Rails.  Textured head lining.  Teak and holly sole.

Flybridge

Helm Position: Laminated timber veneer  with solid moulds.  Moulded instrument panel and stainless 22” wheel.

Finishes Utilised

Plywood veneer.  Polyester ply.  Timber panels.  Ply/foam velour trim.  Lami-panel.  GRP textured lining.  Solid timber.  Coran bench tops.  Laminex.  Stainless sheet.  Polyurethane.  Painted sheet.  Teak and holly panels.

AIR CONDITIONING SYSTEM:  

System is based on an water cooled compressor unit linked up to a multiple number of fan coil units. Design of the system shall be based upon an ambient operating temperature of 35°C (90% RH) and sea water of 32°C. Living spaces to be cooled to 21°C (50% RH).

NAVIGATION and COMMUNICATION EQUIPMENT:

 

PDF Downloads

left click mouse on picture to load PDF file within Browser right click mouse on picture, "save target as" to download to hard drive

	GA A4 588kB

Mark Williamson Design

 48 Sweetgum St, Ashmore Qld 4214, Australia, Ph: (617) 5597 3521 Fax: (617) 5597 3529

E-Mail: info@mwdesign.net.au